Ultrasonic direct detection sensor UB250-F77-F-V31
- Miniature design
- Frequency output
- Program input
- Degree of protection IP67
- Switching status indicator, yellow LED
Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Dane techniczne UB250-F77-F-V31
| Opis produktu |
|---|
| Ultrasonic direct detection sensor |
| General specifications | ||
|---|---|---|
| Sensing range | 35 ... 250 mm | |
| Dead band | 0 ... 35 mm | |
| Standard target plate | 20 mm x 20 mm | |
| Transducer frequency | approx. 400 kHz | |
| Response delay | ||
| Limit data | ||
| Permissible cable length | max. 300 m | |
| Indicators/operating means | ||
| LED yellow | object inside the scanning range | |
| Electrical specifications | ||
| Rated operating voltage | 24 V DC | |
| Operating voltage | 20 ... 30 V DC , ripple 10 %SS ; 12 ... 20 V DC sensitivity reduced to 90 % | |
| No-load supply current | ≤ 20 mA | |
| Time delay before availability | ≤ 150 ms | |
| Input | ||
| Input type | 1 program input | |
| Level | low level : 0 ... 0.7 V (Teach-In active) high level : UB or open input (Teach-In inactive) |
|
| Input impedance | 16 kΩ | |
| Pulse length | ≥ 3 s | |
| Output | ||
| Output type | Frequency output , PNP | |
| Rated operating current | 100 mA , short-circuit/overload protected | |
| Voltage drop | ≤ 2 V | |
| Resolution | Standard: 2 Hz / mm , low: 1 Hz / mm | |
| Repeat accuracy | ± 2.5 % | |
| Off-state current | ≤ 0.01 mA | |
| Output frequency | Standard: 70 ... 500 Hz , low (adjustable): 35 ... 250 Hz | |
| Temperature influence | 0.17 %/K | |
| Compliance with standards and directives | ||
| Standard conformity | ||
| Standards | EN IEC 60947-5-2:2020 IEC 60947-5-2:2019 |
|
| Approvals and certificates | ||
| UL approval | cULus Listed, Class 2 Power Source | |
| CCC approval | CCC approval / marking not required for products rated ≤36 V | |
| Ambient conditions | ||
| Ambient temperature | -25 ... 70 °C (-13 ... 158 °F) | |
| Storage temperature | -40 ... 85 °C (-40 ... 185 °F) | |
| Shock resistance | 30 g , 11 ms period | |
| Vibration resistance | 10 ... 55 Hz , Amplitude ± 1 mm | |
| Mechanical specifications | ||
| Connection type | M8 x 1 connector , 4-pin | |
| Degree of protection | IP67 | |
| Material | ||
| Housing | Polycarbonate | |
| Transducer | epoxy resin/hollow glass sphere mixture; polyurethane foam | |
| Installation position | any position | |
| Mass | 10 g | |
| Tightening torque, fastening screws | max. 0.2 Nm | |
| Dimensions | ||
| Height | 31 mm | |
| Width | 12 mm | |
| Length | 23 mm | |
Classifications
| System | Classcode |
|---|---|
| ECLASS 13.0 | 27272803 |
| ECLASS 12.0 | 27272803 |
| ECLASS 11.0 | 27272803 |
| ECLASS 10.0.1 | 27272803 |
| ECLASS 9.0 | 27272803 |
| ECLASS 8.0 | 27272803 |
| ECLASS 5.1 | 27272803 |
| ETIM 9.0 | EC001849 |
| ETIM 8.0 | EC001849 |
| ETIM 7.0 | EC001849 |
| ETIM 6.0 | EC001849 |
| ETIM 5.0 | EC001849 |
| UNSPSC 12.1 | 41111960 |
Details: UB250-F77-F-V31
The ultrasonic sensor transmits ultrasonic packages in quick succession and responds to their reflection off the detected object. It has a frequency output that delivers a square wave signal. The frequency of this signal changes linearly with the distance of the object. Two frequency ranges are available.
Datasheet: UB250-F77-F-V31
| Datasheet | Typ pliku | Rozmiar pliku |
|---|---|---|
| 数据表 UB250-F77-F-V31 | 595 KB | |
| Datasheet UB250-F77-F-V31 | 740 KB | |
| Fiche de données UB250-F77-F-V31 | 741 KB | |
| Datenblatt UB250-F77-F-V31 | 742 KB | |
| Hoja de datos UB250-F77-F-V31 | 743 KB |
Documents: UB250-F77-F-V31
| Instruction leaflets | Typ pliku | Rozmiar pliku |
|---|---|---|
| Commissioning instruction for ultrasonic sensor series UB-F77 with analog frequency output / Inbetriebnahmeanleitung für Ultraschallsensor-Serie UB-F77 mit analogem Frequenzausgang | 217 KB | |
| Application reports | ||
| Application Report - Object Detection on Robot Grippers | 242 KB | |
| Applikationsbericht - Objekterfassung am Roboter-Greifarm | 244 KB |
CAD+CAE: UB250-F77-F-V31
| CAD | Typ pliku | Rozmiar pliku |
|---|---|---|
| CAD 3-D / CAD 3-D | STP | 68 KB |
| CAD Portal / CAD Portal | LINK | --- |
| EPLAN | ||
| CAE EPLAN Data Portal / CAE EPLAN Data Portal | LINK | --- |
| EPLAN macro EDZ / EPLAN Makro EDZ | EDZ | 64 KB |
Approvals+Certificates: UB250-F77-F-V31
| Certificates | Typ pliku | Rozmiar pliku |
|---|---|---|
| Canada USA UL Ordinary Location | 546 KB | |
| Declaration of Conformity | ||
| EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F) | 48 KB | |
| UK Declaration of Conformity (P+F) / UK-Konformitäterklärung (P+F) | 41 KB |
Produkty powiązane: UB250-F77-F-V31
| Accessories | ||||||
|---|---|---|---|---|---|---|
|
||||||
|
||||||
|
||||||
|
||||||
System czujników ultradźwiękowych USi-safety stanowi przełom w zastosowaniach związanych z bezpieczeństwem. Czujniki można stosować zarówno w trudnych warunkach, w zapylonym środowisku, jak i na zewnątrz.
Firma Pepperl+Fuchs oferuje różne dokumenty do pobrania zawierające informacje na temat czujników ultradźwiękowych.
Pepperl+Fuchs Sp. z o.o.
ul. Owsiana 12
03-825 Warszawa
Polska
NIP: 522-28-27-777
+48 22 256 9770
Pepperl+Fuchs jest czołową firmą konstruującą i produkującą czujniki elektroniczne oraz inne komponenty dla globalnego rynku automatyki. Innowacyjność, wysoka jakość oraz stały rozwój firmy powodują, iż z sukcesem jesteśmy obecni na rynku od ponad 70 lat. Pepperl+Fuchs zatrudnia ponad 6300 pracowników na całym świecie i ma swoje zakłady produkcyjne w Niemczech, USA, Singapurze, na Węgrzech, w Indonezji i Wietnamie. Większość z nich posiada certyfikat ISO 9001.